What is ceramic? A detailed explanation of the principles of ceramic production and the steps involved in the ceramic manufacturing process.
principles of ceramic productio
The fundamental principle of ceramic production involves blending naturally occurring inorganic and non-metallic mineral ingredients in stoichiometric ratios, shaping them into desired green forms, and firing them at elevated temperatures to convert them into a permanent, mechanically robust, and rigid vitreous network.
- China Clay or Kaolin (Al2O3·2SiO2·2H2O): Acts as the primary structural matrix/base of the ceramic body and imparts essential plasticity and workability in the wet state.
- Quartz or Silica (SiO2): Enhances refractory properties (heat resistance), provides skeletal rigidity to the framework, and prevents excessive shrinkage and cracking during drying and firing.
- Feldspar (K2O·Al2O3·6SiO2): Functions as a flux; it melts at a lower temperature to dissolve other ingredients and bind them into a dense, vitrified body upon cooling.
When an intimate stoichiometric mixture of raw materials—clay/kaolin (Al2O3·2SiO2·2H2O), silica (SiO2), and feldspar (K2O·Al2O3·6SiO2)—is heated in a kiln at 600°–650°C, the chemically bound water of crystallization is driven off from the clay, yielding an amorphous mixture of alumina (Al2O3) and silica (SiO2):
Subsequently, at 940°C, the amorphous alumina undergoes an exothermic phase transition, releasing considerable heat to transform into crystalline, granular alumina.
At approximately 1000°C, the granular alumina (Al2O3) and silica (SiO2) react in the presence of molten feldspar (K2O·Al2O3·6SiO2) to form needle-like crystals of Mullite (3Al2O3·2SiO2):
When the kiln temperature is further elevated to 1400°–1500°C, the remaining unreacted silica (SiO2) crystallizes into Cristobalite, a dense crystalline phase. Thus, the resulting aggregate of mullite and cristobalite constitutes the permanent ceramic framework (bisque):
Summing up chemical equations (i), (ii), and (iii), the overall reaction is represented as follows:
The raw materials are weighed in specified stoichiometric proportions and fed into a ball mill along with water for ultra-fine wet grinding. This produces a smooth, homogeneous, clay-water suspension known as Slip. It is subsequently passed through a filter press to remove excess water and achieve the desired plastic consistency.
Depending on the geometry of the target product, the prepared ceramic body is formed using various techniques:
- Slip Casting: Pouring liquid slip into porous Plaster of Paris molds to fabricate hollow ceramic ware (e.g., sanitary basins, vases).
- Jiggering & Jolleying: Using rotating molds and profile blades to shape symmetrical, circular ceramic items such as dinner plates, cups, and bowls.
- Hydraulic Pressing: Compacting semi-dry ceramic powder in rigid dies under intense hydraulic pressure to manufacture ceramic floor and wall tiles.
Freshly shaped ceramic bodies contain significant moisture and are dried gradually under strictly controlled temperature and humidity conditions. Rapid drying causes uneven contraction and results in warping or severe cracking. The unfired, dry ceramic piece is termed Greenware or Blank.
The greenware is fired in a kiln for the first time at approximately 900°C to 1000°C. At this stage, residual organic contaminants burn off, chemically bound structural water completely evaporates, and the clay particles undergo sintering to yield a rigid, porous body known as Biscuit (Bisque).
To render the porous ceramic body smooth, impervious to water, chemically durable, and aesthetically lustrous, a thin coating of glaze is applied. Glaze is an aqueous suspension of fine silica, flux, salt (NaCl), and coloring metallic transition oxides [e.g., CoO (blue), Cr2O3 (green), Fe2O3 (brown), MnO2 (violet)]. It is applied to the bisque by dipping, spraying, or pouring.
The glaze-coated ware is subjected to a second kiln firing at a higher temperature (approximately 1200°C to 1350°C). Under this thermal exposure, the glaze components melt, flow uniformly over the surface, and fuse chemically with the underlying ceramic body to form an impermeable, non-porous vitreous glass layer upon cooling.
Answer: At high temperatures (1600°C), sodium chloride (NaCl) is sprinkled into the kiln over the red-hot ceramic articles (known as salt glazing). In the presence of ambient steam (water vapor), NaCl hydrolyzes and decomposes to produce sodium oxide (Na2O) and hydrogen chloride (HCl) gas:
The generated basic oxide Na2O immediately reacts with the acidic silica (SiO2) present on the surface of the ceramic ware to produce molten sodium silicate (Na2SiO3). This fusible silicate flows into and permanently seals all the microscopic surface pores of the ceramic body. Consequently, when cooled, the ceramic surface becomes smooth, water-impermeable, vitreous, and exceptionally glossy.
