Explain the strategies for controlling air pollution, including the relevant chemical reactions.
Answer: Enormous quantities of fossil fuels (petroleum, natural gas, coal, etc.) are consumed in industrial facilities, power generation plants, and motor vehicles. During their combustion and utilization, toxic and hazardous gases such as SO2, NOx, CO, CO2, H2O, unburnt hydrocarbons, H2S, and NH3 are discharged into the atmosphere. Several of these emissions are severely hazardous to human health and ecological balance. To control air pollution, three primary methods are universally adopted:
- Catalytic Conversion
- Dissolution (Scrubber Method / FGD)
- Fine Particle Filtration Technique
The chemical process of converting hazardous and toxic gaseous emissions generated during combustion into less harmful or environmentally benign products via catalytic reactions is known as Catalytic Conversion.
Through this technique, three primary gaseous pollutants—NOx, CO, and unburnt hydrocarbons—are effectively purified. A catalytic converter unit is installed along the exhaust system adjacent to the combustion zone.
Transition metals and oxides such as Pt, Pd, TiO2, and V2O5 are utilized as catalysts. An adequate supply of secondary air is maintained to ensure complete oxidation. Among these, Pt and Pd are the most efficient catalysts, and the converter functions optimally within a temperature window of 300°C – 400°C.
(a) Decomposition of NOx: Toxic oxides of nitrogen generated during high-temperature combustion are catalytically reduced into harmless nitrogen (N2) and oxygen (O2) gases:
(b) Oxidation of CO: Incomplete combustion yields significant amounts of toxic carbon monoxide (CO), an odorless silent killer. In the presence of excess oxygen, the catalyst oxidizes CO to relatively safer carbon dioxide (CO2):
(c) Oxidation of Unburnt Hydrocarbons: Due to engine inefficiencies or inadequate oxygen, unburnt hydrocarbons escape into the exhaust. They are catalytically combusted into harmless CO2 and water vapor (H2O):
Figure 1: Internal Construction and Exhaust Gas Reaction Mechanism of an Automotive Catalytic Converter
The industrial process of intercepting industrial flue gas—specifically toxic SO2—and absorbing it in an alkaline scrubbing solution before emission from chimneys is known as a Flue Gas Desulfurization (FGD) plant.
In this technique, harmful acidic and alkaline gaseous pollutants such as CO2, SO2, and NH3 are dissolved or chemically neutralized by suitable liquid scrubbing reagents.
This absorption process is commonly termed the Scrubber Method. The scrubber unit typically contains water and slaked lime [Ca(OH)2], caustic soda (NaOH), or a dilute acid such as HCl. When the pollutant-laden flue gas flows upward through the counter-current liquid spray inside the scrubber, approximately 80% – 95% of CO2, SO2, and NH3 are absorbed and removed. Consequently, the purified gas is safely discharged into the environment.
Figure 2: Flue Gas Desulfurization (FGD) / Wet Scrubber System for Acid Gas Neutralization
This technique is widely employed in coal-fired thermal power stations and heavy manufacturing plants to capture and eliminate suspended solid particulate matter (PM) from exhaust gases.
In this operation, the smoke and flue gases containing fine particulate debris (such as soot/carbon particles, fly ash, dust, and mineral particulates) are directed through specialized fabric filters. The filtration units commonly utilize cylindrical bags manufactured from woven cotton or high-performance synthetic polymer fabrics (known as a Baghouse Filter).
As the flue gas traverses through the porous fabric medium, the carrier gas passes through cleanly while the suspended solid particulates are intercepted and retained on the fabric surfaces. The filter bags are periodically subjected to mechanical shaking or agitation to dislodge the accumulated dust cake into collection hoppers located below.
Alternatively, the collected dust is cleared by mechanical vibration or by applying high-pressure reverse pulse air jets (Reverse Pulse Jet Cleaning) through the fabric to restore filtration permeability.
(NOₓ, CO, HC Oxidation)
(SO₂, CO₂, NH₃ Absorption)
(Particulate & Dust Capture)
